Also

How to make an outdoor shower with your own hands: what types of structures are there


After a hard day at the dacha, I want to freshen up and wash away fatigue. How to make a summer shower in the country?

Content:

  • Outdoor shower in the country: description and benefits
  • Place and type of construction
  • Tools and materials for work
  • Step-by-step instructions for making a shower

Outdoor shower in the country: description and benefits

The shower cabin can be open or closed, depending on the preferences of the owners, it can also be semi-closed. By the way of water supply, showers can be:

  • Plumbing
  • Capacitive

In the first case, it will be necessary to make a central water supply. Capacitive showers require a container above the top shower head that heats up in the sun. The cabin for a summer shower made of wood will look original.

You can choose any material for finishing the facade. At the same time, it is important to protect the wood from rotting and other factors, from high humidity. Wood is a versatile option from which you can create any booth design. In addition, it is easy and convenient to work with wood.

Thanks to the summer shower, it is possible to carry out water-hygienic procedures in the country, if the appropriate communications are not carried out in the house. In addition, a shower can serve as an element of the design of a summer cottage. Using various materials, you can create an original shower not only inside, but also outside.

Place and type of construction

To build a summer shower, you should choose a place. The cab must be installed in a well-warmed place. An outdoor shower can be done near a blank wall of a house or in an area where there are no high fences. It is undesirable to place the cabin in the shade of trees or in the part where buildings will block the sunlight.

The water will take a long time to heat up and will be slightly warm. In a suburban area, you can make a shower rack, panel or cabin. You can make a shower rack yourself or purchase a ready-made structure. This counter can be found next to the pool, in the garden, or on the lawn.

The shower panel is fixed to the support: wall, facade, fence, terrace. In this case, the wall is protected from moisture. You can tile it or temporarily hang it with cellophane film. The shower cubicle is a closed structure with a decorative screen or doors.

The cabin can be aluminum, steel or wood. The last option is the most common. There are many options for cabins, but the most budgetary option is a simple film shower. Such a shower will last only one season. This design is mobile and can be positioned anywhere.

If you are planning to build a durable structure, then it is better to make a frame shower. This design can be rectangular or square. The optimal dimensions of the shower stall are: width 100 cm, length 80-120 cm, height about 2 meters.

Tools and materials for work

To make a wooden booth, you will need the following materials:

  • Boards and beams
  • Lining
  • Roofing material
  • Corrugated board
  • Polycarbonate
  • Water tank

A shower barrel can be bought on the market. The best material for a barrel is steel, iron, or plastic. The plastic container weighs less and is easier to mount at a height. A flat-bottomed tank can be a roof at the same time. The only drawback of such a container is the low degree of winter hardiness, so it will need to be removed for the winter.

The iron tank is more bulky. It also needs to be rinsed out of rust. Unlike plastic ones, they heat up more slowly and take longer to cool. It is advisable to choose a cylindrical shape, then the water will heat up faster. From the tools you should prepare:

  • Shovel
  • Hacksaw
  • Grinder
  • Hammer
  • Self-tapping screws
  • Building level
  • Master OK
  • Drill

Before proceeding to the construction of a summer shower, you should sketch a drawing of the future structure.

Step-by-step instructions for making a shower

The construction of a summer shower in the country involves the implementation of the following stages of work.

Site preparation. At the site of the future summer shower, dig a hole about 50 cm deep and 100 cm wide.To avoid soil shedding, you can put several car tires on the bottom. Cover the pit with roofing felt or a thick PVC film from above. Next, put the metal tray in such a way that it is slightly tilted towards the side of the water drain.

To drain the drain into a drain pit, a drain pipe is laid under the pallet. Installation of support pillars. At the next stage, bury beams or iron pipes in the ground. The support pillars should stand straight, this is checked using a building level. Next, fill the bases of the submerged beams with concrete and wait 2-3 days for the solution to freeze.

Tying pillars. Then, in the upper and lower parts, connect the support pillars with bars. The frame structure must be reliable, since in the future a tank with water will be installed on it. Lay about 10 pieces of floorboards on the lower harness, leaving gaps of 2-4 cm between them. This is necessary in order for the water to drain into the sump, otherwise the floorboards will quickly rot.

The construction of the walls of the shower stall. Boards are pre-treated with linseed oil, which prevents moisture penetration into the wood and thereby protects the wood from the appearance of fungal diseases. They are collected and nailed down. If necessary, a small 10x30 cm window can be made to allow light to enter the shower. You can do without a window.

Outside, you can decorate an outdoor shower using any materials: clapboard, plastic, polycarbonate, siding, etc.

Roof installation. Drill a hole in the slate for a pipe from a container with water and put the sheets on top of the booth. Fasten the roof with self-tapping screws. Next, make a lattice of bars, which will serve as a support for the water tank. Planks should be placed between the slate waves. Then place a container of 100 or 200 ml on the roof.

First, you should make a hole into which the pipe with a tap will be inserted. It must be clamped with rubber gaskets and washers so that the pipe does not fall out. The next step is to install the door. At the final stage, put on the nozzle from the watering can on the pipe.

Special knowledge and skills for building a summer shower are not required. It is important to follow the sequence of work and adhere to the specified recommendations.

A budget and quick way to make a summer shower

To create a simple shower in the country, you will need a tank, a faucet, a shower head, a rug, a film and 4 racks. In a sunny area, dig in 4 pillars, fix the tank on top. It is desirable to choose a black color: the water will heat up faster in it.

Then connect the water supply hose to the tank and attach the watering can. Put a rug on the ground, and cover the structure itself with plastic wrap. It only takes 2-3 hours to create this simple shower. Such a budget version of a summer shower is distinguished by its mobility: it can be easily rearranged to another place, and removed altogether for the winter.

Video on how to make an outdoor shower in the country yourself:


Watch the video: Build an Outdoor Shower (January 2022).